NOTE: Bias adjustments can only be performed by a qualified service technician. Do not attempt to adjust the bias yourself. Lethal voltages exist inside the amplifier and can injure or kill you.
Mains voltage of 120VAC, Diode rectified mode (dual channel amplifier models), utilizing a 1 Ohm resisitor to ground on the output tube cathode, the following list indicates each model, tube type and factory bias setting:
British Dream MKII: Mullard EL34 (40 mA) Dream Weaver MKII: Mullard EL34 (40 mA) Dream 40 American: Tungsol 6L6GC (33 mA)
Dream 40 AC: Mullard EL34 (33 mA)
Dream 50 Plexi: Mullard EL34 (33 mA)
|
Here's a list of current tube types and locations for all 3RD POWER Products (updated 11/29/14):
British Dream MKII: V1: JJ EF806, V2 - V3: JJ ECC83S, V4: Sovtek 12AX7LPS, V5 - V6: Mullard EL34 (matched pair), V7: JJ GZ34 Rectifier Tube, V8: Diode Rectifier Insert
Dream Weaver MKII: V1 - V3: JJ ECC83S, V4: Sovtek 12AX7LPS, V5 - V6: Mullard EL34 (matched pair), V7: JJ GZ34 Rectifier Tube, V8: Diode Rectifier Insert
Dream 40 American: V1 - V2: JJ ECC83S, V3: Sovtek 12AX7LPS, V4 - V5: JJ 6L6GC (matched pair), V6: GZ34 Rectifier Tube
Dream 40 AC: V1: JJ EF806, V2: JJ ECC83S, V3: Sovtek 12AX7LPS, V4 - V5: Mullard EL34 (matched pair), V6: GZ34 Rectifier Tube
Dream 50 Plexi: V1 - V2: JJ ECC83S, V3: Sovtek 12AX7LPS, V4 - V5: Mullard EL34 (matched pair), V6: Diode Rectifier Insert
|